Publicité
If cycle counter (9 0C) is selected, the following is true:
1 00 Represents the number of cycles in HUNDREDS. 1 02 = 200
2 00 Represents the number of cycles in ONES.
This is 'VIEW ONLY' and cannot be cleared.
Press the PERM. PRESS button once to advance
to next code.
If money counter (1.0C or 1.C0) is selected, the following is true:
3 00 Number of dollars in HUNDREDS.
4 00 Number of dollars in ONES.
5 00 Number of CENTS.
END OF SET-UP PROCEDURES
2 25 = 225
TOTAL CYCLES = 225
3 01 = 100.00
4 68 = 168.00
5 75 = 100.75
TOTAL = $168.75
EXIT FROM SET-UP MODE
PD MODELS: Reinstall service access door.
■
PR MODELS: Remove set-up card.
■
PR MODELS where AA1 connector was removed:
■
1. Unplug dryer or disconnect power.
2. Open console, reinsert jumper into AA1, close console.
3. Plug in dryer or reconnect power.
PR MODELS WHERE SERVICE ACCESS CODE WAS USED:
■
Set-up mode can be exited by using procedures from Service
Access Code (see page 24).
g
Wait for 2 minutes without activating any dryer inputs.
g
Disconnect and then re-connect power.
27
Publicité
