Publicité
INstaLLatION reQUIreMeNts
TOOLS AND PARTS
Gather required tools and parts before starting installation.
Tools needed:
Adjustable or open end
wrench
/
" (14 mm)
9
16
4" min
(102 mm)
Wood block
Pliers that open to 1
⁄
"
9
16
(39.5 mm)
Optional tools:
Flashlight
Parts supplied:
NOTE: All parts supplied for installation are in
washer basket.
Removable tie strap
Drain hose form
2
Level
Ruler or measuring tape
Bucket
Front leveling feet with
jam nuts (2)
Parts needed:
(Not supplied with washer)
Inlet hoses with flat washers
To order, please refer to the phone number or website on back page
of your "Use and Care Guide".
8212656RP 10 ft. (3.0 m) Inlet hose, Black EPDM (2 pack)
■
8212641RP 5 ft. (1.5 m) Inlet hose, Black EPDM (2 pack)
■
8212646RP 4 ft. (1.2 m) Inlet hose, Black EPDM (2 pack)
■
8212545RP 5 ft. (1.5 m) Inlet hose, Red and Blue EPDM
■
(2 pack)
8212487RP 5 ft. (1.5 m) Nylon braided inlet hose (2 pack)
■
8212638RP 6 ft. (1.8 m) Nylon braided inlet hose, space saving
■
90° elbow, hypro-blue steel couplings (2 pack)
8212637RP 6 ft. (1.8 m) Inlet hose, Black EPDM, space saving
■
90° elbow, hypro-blue steel couplings (2 pack)
Alternate parts:
(Not supplied with washer)
Your installation may require additional parts. To order, please
refer to the phone number or website on the back page of your
"Use and Care Guide".
If you have:
Overhead sewer
Short drain hose
1" (25 mm)
diameter standpipe
Lint clogged drain
Floor drain
LOCatION reQUIreMeNts
Select proper location for your
washer to improve performance
and minimize noise and possible
"washer walk". Install your
washer in a basement, laundry
room, closet, or recessed area.
You will need:
Standard 20 gal. (76 L) 39"
(991 mm) tall drain tub or utility
sink, sump pump, and connectors
(available from local suppliers)
Drain Extension Kit Part Number 49022
2" (51 mm) diameter to 1" (25 mm) diameter
Standpipe Adapter Kit, Part Number 40923
Connector Kit, Part Number 285835
Drain protector, Part Number 376031
Siphon Break Kit, Part Number 280129A
Drain Hose, Part Number 285702
Connector Kit, Part Number 285835
27"
(686 mm)
42"
(1067 mm)
25
/
"
1
2
(648 mm)
Publicité
