Publicité
1
1
16
10 CHEEK PADS
10 CHEEK PADS
10.1 REMOVAL
10.1 REMOVAL
Prerequisite: in a seated position, place the helmet up-
Prerequisite: in a seated position, place the helmet up-
side-down on your knees. Release the fastening system.
side-down on your knees. Release the fastening system.
Lift the chin guard and sun visor. Begin the operation on
Lift the chin guard and sun visor. Begin the operation on
the right side cheek pad.
the right side cheek pad.
• • Insert your hand inside the helmet between
Insert your hand inside the helmet between
the cheek pad and the polystyrene shell, then
the cheek pad and the polystyrene shell, then
unhook the four snap buttons
unhook the four snap buttons
the cheek pad from the polystyrene shell.
the cheek pad from the polystyrene shell.
• • Bend
Bend the cheek pad
the helmet, then remove the fastening sys-
the helmet, then remove the fastening sys-
3
tem
tem
release the retention system snap button).
release the retention system snap button).
1
• • Free the plastic ring
Free the plastic ring
6
located on the lower corner of the shell.
located on the lower corner of the shell.
1 6
• • Pull out the whole cheek pad by slipping the
Pull out the whole cheek pad by slipping the
plastic band
plastic band
5
› ›
Repeat the previous operations on the left
Repeat the previous operations on the left
side cheek pad.
side cheek pad.
3
4
1
2
2
the cheek pad
towards the inside of
towards the inside of
through its appropriate gap
through its appropriate gap
5
from the snap button
from the snap button
7
from its guide.
from its guide.
5
1
, releasing
, releasing
4
(don't
(don't
6
Publicité
