Publicité
6 LUBRICATING OIL
Applying silicone oil to the visor mechanism prevents the onset of corrosion and both-
ersome creaking.
Prerequisite: the helmet is placed on one of its two sides.
• Remove the visor (see 5.3).
• Apply a moderate amount of oil to the visor mechanism of the helmet.
• Wipe off any excess oil with a cloth.
• Replicate the operations on the visor mechanism on the other side of the helmet.
›
Install the visor (see 5.4).
In case of contact with skin, wash thoroughly with plenty of soap and water. In case of contact
with eyes, wash with plenty of water and seek medical advice. If swallowed, seek medical
advice. In case of inhalation, breathe in fresh, open air. Avoid exposure to sunlight. Store in a
dry place at a temperature below 50°C. Keep out of the reach of children and animals.
Do not allow the product to penetrate into the soil/subsoil. Do not allow product to
reach surface water and/or sewage systems. Keep contaminated washing water con-
tained and dispose of it appropriately. In case of penetration into watercourses, soil or
sewage systems, inform the relevant authorities. Suitable material for collection: ab-
sorbent material, organic material, sand. Do not litter the container in the environment.
7 AGV INSYDE COVERS
Do not remove the covers of AGV Insyde if you have not purchased AGV Insyde yet and
if you are not just about to assemble it. To remove the AGV Insyde covers refer to the
AGV Insyde assembly booklet, provided with the accessory. Removing the covers im-
properly and without having the instructions can damage the product.
12
Publicité
