Publicité
1
1
2
3
10
5.3 REMOVAL
Prerequisite: the visor is fully open. Start the operation
on the right-side visor mechanism.
• Pull down the spring slider
gernail, then detach the visor from the
mechanism.
›
Repeat the operation on the visor mechanism
on the left-side visor mechanism.
5.4 INSTALLATION
Prerequisite: begin the operation on the right-side visor
mechanism.
• Grasp the visor and pull down the spring slid-
1
er
with a fingernail.
• Place the visor on the associated mecha-
nism, so that the two engagement tabs
are seated into their slots
• Release the spring slider.
• Repeat the above operations on the left-side
visor mechanism.
›
Visor installed. Rotate it, making sure it
is securely attached and the movement is
smooth.
Opening / closing the chinguard without the vi-
sor fitted can cause the come out of the mecha-
nism 3 from its sliding seat.
1
with a fin-
2
3
.
Publicité
