Télécharger Imprimer la page

Skil ID6720B-00 Guide D'utilisation page 11

Visseuse à percussion sans balais de 20 v

Publicité

OPERATING INSTRUCTIONS
WARNING
or allow a fluid to flow inside them. Corrosive or conductive fluids, such as seawater, certain
industrial chemicals, and bleach or bleach-containing products, etc. can cause a short circuit.
WARNING
could result in serious personal injury.
WARNING
misuse and could result in a hazardous condition leading to possible serious injury.
WARNING
making adjustments, cleaning, or performing maintenance .
This cordless impact driver must be used only with the battery packs and chargers listed below:
2Ah
BY519701
BY519702
BY5100B-00
Please refer to the battery pack and charger manuals for detailed safety and
NOTICE
operating instructions.
Attaching/Detaching Battery Pack
(Fig . 2)
Lock the variable-speed trigger switch "OFF"
on the tool by placing the direction-of-rotation
(forward/center-lock/reverse) selector in the
center position before attaching or detaching
the battery pack.
To attach the battery pack:
Align the raised rib on the battery pack with the
grooves on the tool, and then slide the battery
pack onto the tool.
When placing the battery pack on
NOTICE
the tool, be sure that the raised
rib on the battery pack aligns with the groove
inside the tool and that the latches snap into place properly. Improper attachment of the
battery pack can cause damage to internal components.
To detach the battery pack:
Depress the battery-release button, located on the front of the battery pack, to release the
battery pack. Pull the battery pack out and remove it from the tool.
WARNING
locked in the center position when the tool is not in use or carrying it at your side .
To reduce the risk of fire, personal injury, and product damage due to a
short circuit, never immerse your tool, battery pack, or charger in fluid
If any parts are damaged or missing, do not operate this product until
the parts are replaced . Use of this product with damaged or missing parts
Do not attempt to modify this tool or create accessories not recom-
mended for use with this tool . Any such alteration or modification is
To prevent accidental starting that could cause serious personal injury,
always remove the battery pack from the tool when assembling parts,
Battery pack
2.5Ah
BY519601
BY519703
BY5140B-00
Battery tools are always in operating condition . Therefore, the direction-
of-rotation (forward/center-lock/reverse) selector should always be
4Ah
5Ah
BY519603
Fig. 2
Attach
Battery-Release Button
Charger
SC535801
QC536001
QC5359B-02
SC5358B-02
SC0030B-00
Detach
11

Publicité

loading