Publicité
Getting Started
Filling the Water Reservoir
1. Remove the water reservoir from the coffee maker by gently lifting it out of the water reservoir
base.
2. Remove the lid by using your fingers or thumb to press up until the lid releases from the water
reservoir body.
3. Fill the water reservoir with cool or room temperature water to your desired volume.
4. Replace the lid on the water reservoir and press down until it is secure.
5. Place the water reservoir back into the base.
Adding Beans to the Bean Hopper
1. Remove the bean hopper lid by pressing and lifting the edge of the lid. There is a silicone seal,
so it may take some force to remove it the first time.
2. Pour your desired beans into the bean hopper. Spread beans out so they evenly cover the
bottom surface.
3. When beans have been added, replace the lid on the bean hopper and press down firmly to
secure it and reduce noise during grinding.
4. Turn the grinder knob to your desired grind size. It is recommended to use grind size 3 or 4 for
most coffee beans.
8
49-9000061 Rev. 1
Publicité
