Publicité
en-us_main.book.book Page 34 Tuesday, September 10, 2024 1:23 PM
34 SPECIAL INSTALLATIONS
• 0 = no spring tension
(Optional) After adjusting the door spring, attach the gray plastic sheets to hide the adjusting screws
and the hinge holes
.
b
Adjusting the Door Stop
The default door stop position is 115°. Follow these instructions to change the door stop position to 90°.
1
Open the door to 90°.
2
Insert the door stop pin in the holes which are now aligned at the back of the hinge. Use a rubber
mallet to fully insert the pin.
a
Publicité
