Publicité
en-us_main.book.book Page 23 Tuesday, September 10, 2024 1:23 PM
Attaching Appliance to Enclosure
WARNING
• To avoid tip overs, the appliance must be attached to the top of the enclosure and the anti-tip brackets
must be engaged.
• The top of the enclosure must be made of a solid material (not MDF) that is at least 5/8" (16 mm) thick.
1
Screw the lugs on the safety bracket at the top of the appliance to the top of the enclosure.
4X15 (4 ea)
a
2
If there is a large gap between the top of the appliance and the top of the enclosure, insert a piece of
wood between the lugs and the top of the enclosure to fill the gap.
3
Screw the side safety brackets to the sides of the enclosure.
4X15 (4 ea)
a
NOTE
• If installing two appliances side-by-side, attach the appliances to each other using the unification kit.
Attach them to the sides of the enclosure as if they were one unit.
INSTALLATION
23
Publicité
