Publicité
Once the hopper has been placed, we will proceed to
assemble the mouth protector. To do this, we will place
the protector at the entrance mouth of the hopper
as shown in the image and we will fix it with 4 M8
security nuts, 4 M8 grower washers, 4 Ø8 washers
and finally 4 M8x16 screws.
6.2.4. ASSEMBLY OF THE COLLECTION BAG
Put the U legs into the bag and lock them with M8
nuts.
Connect the two U legs with 2 bolts and these secured
by 4 M8 nuts:
Connect the handle with M8X16 screws:
6.2.5. ASSEMBLY OF THE EMERGENCY BUTTON
35/116
Unscrew the 4 screws on the
safety button housing.
English
Publicité
