"Prog" Mode; Program Selection - Etherma SERENA ECO Instructions D'installation Et D'utilisation

LOCKING THE CONTROL BOX
Regardless of your choice of operating mode, you have the
option of locking the control box keypad.
For example, if you have selected ECONOMY mode, press
the + and - buttons simultaneously for about 3 seconds. The
flashing display shows the key lock.
If you press any key on the keyboard, the display with the "FF"
symbol shows the lock and your request is ignored.
To cancel the key lock, press the + and - buttons again for 3
seconds.

"PROG" MODE

This mode enables the automatic operation of your heater via
a programming unit or individual programming.
Press the MODE button until the Prog indicator lights up and
you enter the program menu. Programming is done by the
user.
PROGRAM
P1 With program P1 you can set the comfort set point in the morning from 6 to 8 AM and in the evening from 5 to 11 PM.
With program P2 you can set the comfort set point in the morning from 6 to 8 AM, lunch time from 11.30 AM to 1.30 PM and in the
P2
evening from 5 to 11 PM.
P3 With program P3 you can set the comfort set point temperature from 8 AM to 11 PM.
FP With the FP program you can switch to pilot cables
In any case, you must set the clock and the day on your device (factory setting is 00:00) to use
the predefined program. Please refer to the section on setting the clock.
In the event of a power failure lasting more than 30 minutes, you will need to reset the time.

PROGRAM SELECTION

+ +
- -
LU P1 P2
+ +
- -
MA P1 P2
+ +
- -
ME P1 P2
14
FF
HG
EC
--
MEANING OF PROGRAMS P1, P2, P3 OR FP
+ +
Monday
- -
= LU
P3 FP
+ +
Tuesday
- -
= MA
P3 FP
+ +
Wednesday
- -
= ME
FP
P3
Prog
CF
Use the + or - buttons
to select the preset
program
Use the + or - buttons
to select the preset
program
Use the + or - buttons
to select the preset
program
M
-
MODE
M
-
MODE
M
-
MODE
Prog
M
-
MODE
Prog
Prog
Confirm with
the MODE
button.
Confirm with
the MODE
button.
Confirm with
the MODE
button.
M
-
MODE
M
-
MODE
M
-
MODE
M
-
MODE
Prog
Prog