Publicité
TOOLS AND PARTS
Gather the required tools and parts before starting installation.
Read and follow the instructions provided with any tools listed
here.
Tools needed (all models)
■ Drill
■ 1.18" (3.0 cm) drill bit
■ .11" (3.0 mm) drill bit for pilot holes
■ Pencil
■ Wire stripper or utility knife
■ Tape measure or ruler
■ Caulking gun and weatherproof caulking compound
■ Flat-blade screwdriver
■ Phillips screwdriver
ACCESORIES
Models EFS130BL, EFS130WH
(ducted or non ducted (recirculation) installation)
Parts Supplied
■ 2 - 3.5 x 9.5 mm screws.
■ 3.2" x 10" (8.3 x 25.4 cm) rectangular vent connector.
■ Rectangular Carbon Filter. Accessories part No. TM02DC
WARNING
When used in recirculation mode, to reduce the risk of fire and
electric shock use only conversion kit model TM02DC.
■ Saber or keyhole saw
■ Metal snips
■ Compass or 8" (20.3 cm) circle template
Parts Supplied (all models)
■ 4 - 3.5 x 9.5 mm mounting screws
Parts Needed (all models)
■ 3 - UL listed wire connectors
■ Vent clamps
For cabinets with recessed bottoms:
■ Two 2" (5.1 cm) wide filler strips. Length and thickness
determined by recess dimensions.
■ Four flat head wood screws or machine screws with washers
and nuts (to attach filler strips).
Parts Needed
■ Wall or roof cap to match vent system
■ 1 - 75W max, 120V incandescent light bulb.
■ 3.2" x 10" (8.3 x 25.4 cm) rectangular metal vent system
4
Publicité
