Publicité
11) [Only for
according to the above, press the day selection button (j) to set the day of
the week to start the automatic operation. Then select the time of
switching on with the edit button (m). With the buttons for increasing and
decreasing the value of a parameter (h or f), select the target temperature
and save it in the device's memory with the confirmation button (g).
IMPORTANT!
During automatic weekly operation according to the programmed
schedule, pressing the buttons (j, l, m, n) allows you to check the time
settings for a specific day and its set time interval program.
If no specific heating temperature is set, its default value is 23
However, when the ambient temperature is higher than that set on
the device, it will not start up.
When the power is turned off, the automatic weekly program will be
lost.
3.3.8 "Open window" detection function
1) Activating operation mode
Press the device on/off button (a) "
Warm up the device (it must work a period of time on heating).
2) Enabling window detection
Press the open window detection on/off button (i) "
remote control. The "
the digital display will default to 23°C, showing as "
Use the parameter decrease "
set the working temperature as needed.
EN
] After programming the previous steps
" to enter operating mode.
" and "
" indicators will light up, and
"/increase "
o
C.
" on the
".
" (f/h) buttons to
Publicité
