Publicité
3. Press the heating level button (e) "
heat" mode, with both "low heat" "
(see pictures below)
4. Press the heating level button (e) again to turn off the heating, ventilation will
stop after approx. 30 seconds and the device will go into standby mode.
5. The function of the timer button (c) works in the same way as from the control
panel (see the description above).
6. The air supply flap button (b) "
to switch it off. In the
confirmed by the corresponding indicator on the control panel - the same icon
as on the button of this function on the remote control.
3.3.5 Setting current time/day
NOTICE! The settings can be changed both in standby mode and during
operation.
Press the time and day setting button (d) "
and the display will flash and show the default value "12". Use the
EN
" twice: The product operates in "high
" and "high heat" indicators "
": Switch it on by pressing it once. Press again
model, the activation of the flap is
" on the remote control,
" lit.
Publicité
