Publicité
EN
3.3.2 Timer setting
Press the timer button "
"on the control panel (G) or the remote control (C) to
set the timer from 01-12 hours to indicate automatic shutdown. Each press of this
button increases the time by 1 hour. After setting the time, the display will show the
currently set time for 5 seconds. Then the display will revert to showing the previous
value, and the timer indicator "
" lights up. (See the pictures below, e.g. timer
set to 8 hours)
3.3.3 Setting the switch-on time
In standby mode, press the timer button "
" on the control panel (G) or the
remote control (C) to set the delay time for the automatic start-up of the unit in the
range of 1-12 hours. Once set, the display will show the time to switch-on and the
timer indicator "
" will be illuminated. The remaining time will be indicated with
a countdown every hour. After the set time has elapsed, the device will start up with
o
the default temperature of 23
C. (See the pictures below, e.g. scheduled to start in
8 hours)
Publicité
