Publicité
parameter decrease "
hour (24-hour format).
Press the time and day setting button (d) "
minute setting. The display will show the default value "30". Use the
parameter decrease "
minute (selection range 00-59).
As soon as you set the time, press the time and day setting button (d)
"
" again to choose the current day of the week. The display will show
the message "
" as default, where:
d1 = Monday; d2 = Tuesday, d3 = Wednesday, etc. until Sunday = d7.
Set the current day of the week by using the parameter decrease
"
"/increase "
the value (g) "
" to approve the selected values. The display will revert
to showing the previous information as before changing the settings.
For example, if we set Wednesday, 9:30 a.m., heating at 25
heat, the setting diagram will look like this for a given model:
IMPORTANT!
The set time and day will be retained in standby mode. If the main
power is turned off or there is a power outage, the settings must be
reconfigured. e.g. sudden disconnection of the power plug from the
socket.
EN
"/increase "
" (f/h) buttons to set the current
"/increase "
" (f/h) buttons to set the current
" (f/h) buttons. Then use the button for confirming
" again to move to the
o
C with high
Publicité
