Publicité
If the difference between the set temperature and the ambient
°
temperature is > 2
C, the unit works at full power. If this difference is <2
the unit operates at lower power.
When the temperature set on the unit is equal to the ambient
temperature, the fan will run for another 30 seconds to cool down the unit
inside and then the unit will go into standby mode.
When the temperature in the ambient standby mode drops below 2
relation to the temperature set on the device, it will turn on automatically
and start heating.
3.3.7 Setting the weekly program
1) Press the on/off button "
2) Set the current time and day as described above (see more under the
section "Setting current time/day").
3) Press the automatic operation programming start button (k) "
remote control. The weekly indicator " " will light up, indicating the
activation of the weekly timer setting. (See the picture below)
4) Press the day mode button (j) "
" (the corresponding day of the week, i.e. Monday to Sunday). Select a
specific day of the week, e.g. Monday = "
EN
" to enter operating mode.
" and the display will show "
", Tuesday = "
°
C,
o
C in
" on the
" to "
", etc.:
Publicité
