Publicité
k) Automatic operation programming start button
n) Automatic shutdown setting button
3.3.1 Startup
1. Connect the device to the power socket and set the power switch (E) to the "
" position - the device will go into standby mode and the display (I) will show
the message " " as shown below.
2. Press the function selection button ( ) once on the control panel: The product
operates in "cool wind" mode. The display will show the value "
pictures below) and the
(see the picture below on the left):
EN
l)
Auto-on button
m) Edit button
model's fan indicator will light up
" (see
Publicité
