Dust Extraction - Festool ETSC 125 Li Notice D'utilisation D'origine

English
4a
Hardness of the sanding pad
Adapted to the surface being processed, the
machine can be equipped with sanding pads of
different hardnesses.
Soft: Universal for coarse and fine sanding, for
flat and convex surfaces.
Extra-soft: Fine sanding of moulded parts,
arches, radii. Do not use on edges.
8.3 Attaching sanding accessories using
StickFix [4b]
The suitable StickFix sandpaper and StickFix
sanding cloth can be attached quickly and sim­
ply to the StickFix sanding pad.
► Affix the self-adhesive sanding accessory to
the sanding pad.
In the case of a weakening adhesive ef­
fect of the StickFix surface, the sanding
pad accessories, in particular those which are
not yet touching the workpiece, may come
loose from the sanding pad and cause injuries.
Replace the sanding pad!
12
8.4

Dust extraction

WARNING
Dust hazard
► Dust can be hazardous to health. Always
work with a dust extractor.
► Always read applicable national regula­
tions before extracting hazardous dust.
Integral dust extractor with long-life dust bag
As standard, the sanders are equipped with an
integral dust extractor. The sanding dust is ex­
tracted through extraction openings in the
sanding pad and is collected in the dust bag.
Installing the dust bag [5]
Slide the dust bag onto the machine until it
clicks into place.
If the suction power is decreasing, empty
the dust bag.
Press the dust bag onto the actuating ele­
ments.
4b
1
5