Publicité
START QUICK MILK CLEAN?
5:00 min
to start press
clean/setting
my favourites
HOME
START/STOP
3
Tilt it slightly and slide it completely into the machine's guides until it hooks
onto the drip tray.
Note: do not force the carafe while inserting it.
Removing the milk carafe
Rotate the carafe upwards until it is naturally released from the insert in the drip
tray. Then remove it.
Dispensing frothed milk-based coffee beverages
Tip: Preheat the cups with hot water to enjoy a hotter beverage.
Tip: use cold milk (at a temperature of around 5 °C) with a protein content of at
least 3% to ensure optimum results for the froth. You can use either whole milk or
semi-skimmed milk. You can also use skimmed milk, soy milk or lactose-free milk.
1 Press the HOME
HOME
-
Press the button for the beverage desired and place a suitable cup or glass
beneath the coffee dispensing spout and the carafe dispensing spout.
-
Press the START/STOP
2 The machine will dispense a predefined amount of frothed milk into the cup or
glass. The coffee or the frothed milk may be dispensed first, depending on the
beverage selected.
If you wish to customise the beverage before dispensing, refer to the "Beverage
customisation" chapter.
3 After dispensing your frothed milk-based coffee beverages, it is best to
complete the quick cleaning procedure of the carafe within 10 seconds.
However, the procedure can also be carried out at a later time by opening the
cleaning menu via the CLEAN/SETTING
shown on the display. The cleaning procedure can be carried out with milk in
the carafe.
Note: We recommend cleaning the machine via the quick clean procedure at least
once a day.
Press the START/STOP
procedure at a later time.
button and choose the desired beverage from the menu.
button to start brewing the selected beverage.
START/STOP
clean/setting
button to confirm, or "
START/STOP
English
button. Follow the instructions
" to carry out the
21
Publicité
