Hendi 225479 Mode D'emploi page 7

Pause
When the oven is in operation, the oven will PAUSE
if the "START/PAUSE" (K5) button has been pressed
and resume operation (with temperature settings
Switch OFF
When the oven is in the operation mode or hold
mode, you can switch off the oven by pressing the
standby button K1 (the oven is in standy mode now).
Power indicator light L1 is still ON, but all other in-
If needed reverse the door
It is possible to reverse the door according to the following instructions.
Step 1
• Switch off the appliance and dis-
connect the power supply
• Wait until the appliance has cooled
down
• Remove any food trays inside the
chamber
• Lay down the appliance on the side
so that the hinge of the door is on
the top
unchanged) when the "START/PAUSE" button is
pressed again.
dicator lights L2 to L5 will be off. Switch off: turn off
te green switch on the back if present. If not present,
then remove the plug from the socket.
Step 2
• Use a flat screw driver to losen the
screw and remove the door hinges
Step 3
• Remove the door
• Use a flat screw driver to unscrew
the bolt on the door's frame top
part and reverse the bolt position
EN
7