Key
Definition
ESC key
Exit from the current interface or function
Up key
Move the cursor to the upper part or increase the value
Down key
Move the cursor to the lower part or decrease the value
Enter key
Confirm the selection
• Battery (T-BAT-SYS)
No.
Mode
1
Startup
2
Shutdown
3
Standby
4
Charging
5
Discharging
6
Fault
7
Working
B+
COM
HEAT
B-
After pressing the BMS BUTTON to start the system, the
status light flashes yellow for 0.1 second and turns off
for 0.1 second, and all the SOC power indicators are off.
After pressing and holding the BMS BUTTON for more
than 1 second, the status light comes on solid green
light, and the SOC power indicators flash blue in turn.
Then all lights are off within 2.4 seconds after releasing
the button.
The status light flashes green for 1 second and turns off
for 4 seconds. The SOC power indicators are off.
The status light comes on solid green light, and the
state of SOC power indicators depends on the actual
situation. For details, please refer to the User Manual.
The status light comes on solid green light, and the
state of SOC power indicators depends on the actual
situation. For details, please refer to the User Manual.
In case of failure, the status light will remain on solid
red light for 10 minutes, and then such red light will
flash for 1 second and then turn off for 4 seconds.
In case of warning, the status light will flash yellow light
for 1 second, and then turn off for 4 seconds.
B-
Status
25%
50%
75%
100%
Light
SOC1 SOC2 SOC3 SOC4
Description
171