Publicité
Tapping screw
9
8-10 N·m
10
11
Tighten screws on both sides.
*Note: If the base is shifted
before securing assembled
bracket, move it to its original
location according to the mark
previously drawn.
M5×14
2.2-2.5 N·m
*Note: The side with "R"
shall be against the wall.
Tighten screws on both sides.
*Note: Please make sure that the
corners and edges of the base and
battery module are aligned before
tightening screws.
M5*14
2.2-2.5N·m
121
Publicité
