Publicité
Two Towers
Take the installation procedure Option E (with 2+2 battery modules) as an example.
As for the installation steps for the following
figure, please refer to the Step 1 to Step 4.
1
Totalling 4 screws shall be tightened
*Note: The side of the series box with "R" shall be against the wall.
2
*Note: The cover that covers on the series box shall be installed after finishing wiring. As
for the installation procedure of the cover, please refer to the section of "Installation of
Cover".
M5*14
2.2-2.5 N·m
127
Publicité
