Publicité
LAN Mode:
Disassemble the waterproof connector into components 1, 2 , 3 and 4;
1
Component 1 is not used, keep it in a safe place.
2
Step3: Remove the waterproof cover (refer to WiFi mode step 2), then plug the dongle to
the inverter.
* Note: Ensure the dongle port is sealed with the dustproof cover when no device is plugged in. Otherwise, it may cause
inverter damage.
3
2
1
4
M2.5
0.8±0.1 N·m
163
Publicité
