Publicité
Connect B+ of the BMS to B+ of the series box;
Connect B- of the BMS to B- of the series box;
Connect COM port of the BMS to COM port of the series box;
Connect HEAT port of the BMS to HEAT port of the series box;
Connect the grounding of the BMS to the grounding terminal of the series box
B+
COM
B-
Right side of BMS
Communication cable (COM port)
Power cable
Heater cable/
Grounding cable
Communication cable
*Note: 1. There are two terminals on both ends of the power cables.
4
2. Both ends of the communication cable shall be closed using a rotation wrench.
142
Heater cable (HEAT port)
HEAT
Rotation
wrench
B+
Left side of Series Box
Right side of Series Box
0.8-1.0 N·m
Publicité
