Publicité
Make sure the installation base is level and stable. Make sure there is at least 2m*1m of free space at
the rear of the machine (see image below - the rectangle indicates the dimensions of the free area)
and at least 0.5m of free space on each side of the machine (see image below)
.
Maintenance
- Regularly check that elements fastened with nuts and bolts are correctly tightened.
- To maintain the level of safety, the equipment must be regularly checked. It is vital that any faulty
parts are replaced and that it is not used until completely repaired. Remember regularly to grease
moving parts.
- As sweat is very corrosive, do not allow it to come into contact with the enameled or chromed parts
of the equipment, particularly the computer. Immediately wipe the equipment after training. The
enameled parts can be cleaned using a damp sponge. All aggressive or corrosive products should be
avoided.
Guarantee: the chassis is guaranteed for 5 years. Moving parts are guaranteed for 2 years. The
guarantee applies to normal use by a private individual in his home. Validate your product warranty on
line www.carefitness.com
Recycling : The « crossed out dustbin » sign means that this product and its batteries cannot be
thrown out whit domestic waste. They should be treated apart. When you have finished with them,
drop them at an authorised collection point so they can be recycled. This gesture will go towards
protecting the environment and your health.
- 4 -
Publicité
