Lighting Conditions (Ratio) For The Flash Groups Settings On The Master Flash Unit; Lighting Conditions For Flash Groups A + B Settings On The Master Flash Unit - Metz mecablitz 52 AF-1 Canon digital Mode D'emploi

10.1.4 Lighting conditions (RATIO) for the
flash groups settings on the master
flash unit
The lighting conditions of the flash groups (A,
B, C) can be set proportionally in order to
obtain specific lighting effects. The lighting
conditions for all groups are controlled exclu-
sively via the master flash unit.
• Press the
for the selection menu to appear.
• Press the
touch display.
• Press the
ZOOM
touch display and select "RATIO".
RATIO
• Press the
CHANNEL
touch display.
• Press the desired sensor button on the
A+B+C
touch display:
A+B+C
A : B all three groups are the same (RATIO Off).
A : B
Ratio of group A to group B.
A : BIC
A : BIC
Ratio of group A to group B plus an
exposure correction (EV) for group C.
The setting is adopted immediately.
D
button as often as it takes
PARA
sensor button on the
sensor buttons on the
RATIO
sensor button on the
10.1.4.1 Lighting conditions for flash groups
A + B settings on the master flash
unit
REMOTE
E TTL
MASTER
+ 1
• If lighting conditions are to be set for slave
A : B
flash group A+B, then press sensor button
A : B
on the touch display until the selecti-
1 : 1
on of ratio settings appears.
INFO A : B
RATIO
• Press the
touch display and set the lighting conditi-
A : B
ons (e.g. 1: 4) for the slave flash groups.
1 : 1
A B
RATIO
• Press the
A : B
1 : 4
A B
The selected setting is adopted.
REMOTE
E TTL
MASTER
+ 1
A : B
1 : 4
INFO A : B
A 3 4 B
or sensor buttons on the
1 : 4
sensor button.
k
169