Publicité
6.4 Part Replacement
Replace the Blades
1
WARNING
• Always power off your ECOVACS GOAT before operation.
• Always wear protective gloves when replacing the Blades.
• Use only the Blades manufactured by ECOVACS and new screws when assembling the Blades.
• Wipe the unwashable components with a clean and dry cloth. Please do not use cleaning sprays or other detergents.
STEPS TO REPLACE THE BLADES
Step 1: Power off ECOVACS GOAT.
Step 2: Gently turn your ECOVACS GOAT over on a soft surface.
Step 3: Loosen the Screws with a screwdriver.
Step 4: Remove the Screws and the Blades.
Step 5: Tighten the new Blades and the Screws.
Step 6: Make sure that the Blades can spin freely.
31 EN
Publicité
