Publicité
PONT ELEVATEUR 4 COLONNES
PE 4101T
CHEMIN PLAT OSCILLANT 400V 5T
Vehicle lowering
1. Remove all obstacles under and around the lift.
2. Press the DOWN button, after which the sliding table will fi rst rise a little, then be unlocked
pneumatically, and fi nally descend.
3. Press the LOCK button, after which the lift will be locked by the mechanical lock.
SAFETY RULES OF ELECTRICAL SYSTEM
1. Only the trained personnel with professional knowledge is allowed to carry out electrical repair
and troubleshooting.
2. Do not modify or omit the protective interlocking device.
3. Read carefully and pay attention to warning signs before start.
4. Cut off the power and lock the main switch before troubleshooting.
5. Pay attention to prevent electric shock when working in wet places.
6. All personnel must stay away before the power is supplied to any device. Do not open the
electrical box unless there is a need to inspect the electrical equipment.
7. Do not modify the circuit unless proper authorization is obtained from the manufacturer.
8. Inspect if the new electrical part meets the proper specifi cations (including the color code of
wire) before replacement.
9. Do not wear metal glasses, necklaces, etc. when operating electrical equipment. In addition, do
not wear rings, watches and bracelets.
Power indicator
Lock button
Up button
Down button
Publicité
