Publicité
6 Cleaning and maintenance
A
WARNING: Do not operate the robot vacuum cleaner without installing the filter group.
Otherwise, the appliance may get damaged
6.2 Cleaning of the brush
1. Open the upper cover of the main brush by pressing on the tabs. Pull and remove the main roll upwards.
Cut the hair lapped on the roller brush with the cutting and sharp side of the cleaning brush. Then clean
the dusts on the roller brush with the bristles of the cleaning brush.
2. Replace the brush after cleaning it and close the cover in the direction of the arrow.
6.3 Cleaning and installation of the side brush
In the long term use, wash the side brush with warm water in order to eliminate the shape deformation.
Install it to the robot as it is shown after it has dried.
Robot Vacuum / User Manual
.
21 / EN
Publicité
