5 Operation
A
WARNING: If the charging level is too low, the cleaning cannot be started. Please charge the
appliance before starting the cleaning.
A
WARNING: Before the cleaning, tidy up all cables to prevent disconnections due to entangle-
ment/pulling of the cables and to prevent damage to the furniture.
A
WARNING: In the auto mode, by default the machine will do sweeping twice if the sweep
duration is shorter than 10 minutes.
A
WARNING: Do not move the charging dock during cleaning and make sure that the station
is plugged; otherwise the robot vacuum cleaner may not be able to return for recharging.
Pausing
Pressing any button will stop the robot while working.
Automatic charging: The robot vacuum cleaner returns automatically to recharge after the cleaning is
completed.
Manual charging: a. Please press
manually put the robot back to recharging dock if the robot is stuck or cannot find the recharging dock.
Spot Cleaning (supported with the relevant mobile application only)
1.5m
Move the sweeping robot to the area to be cleaned, press the
is activated, the sweeping robot will sweep the circular area with a diameter of 1.5 m
calculated from its own position.
C
The sweeping robot cannot enter the fixed-point sweeping mode on the recharging dock.
Vacuum power selection
(Supported with the relevant mobile application only) You may select the desired cleaning power from
the application:
• Quiet
• Standard
• Powerful
• Maximum
Remote controlled cleaning
(Supported with the relevant mobile application only) You may direct the robot vacuum cleaner to the
area to be cleaned by using the manual remote control mode through the application.
14 / EN
shortly when pausing to begin automatic recharging. b. Please
twice. After the mode
Robot Vacuum / User Manual