Publicité
5 Operation
Remove the swab on the mop
retainer as it is shown.
Install the mop retainer to the
dust container and the water
tank assembly (two in one) in
the direction of the arrow.
5.3.2 Wet mopping setting
You may start the cleaning operation by selecting the cleaning mode and set the level of wetness during
mopping as desired in the application.
It is suggested remove carpets from the floor to prevent the device from wetting the carpet when mop-
ping the floor.
18 / EN
Moisten the swab before each
mopping.
Install the dust container and the
water tank assembly (two in one)
to the appliance, their places in
the direction of the arrow.
Place the swab to the mop retainer.
Robot Vacuum / User Manual
Publicité
