Publicité
en
ENGLISH
Original instructions
1. Declaration of Conformity
We, being solely responsible, hereby declare that
this product conforms to the standards and
directives specified on page 3.
2. Specified Use
The band file is used for dry sanding, deburring and
polishing metals, wood, materials similar to wood,
plastics and construction materials.
The user bears sole responsibility for any damage
caused by improper use.
Generally accepted accident prevention
regulations and the enclosed safety information
must be observed.
3. General Safety Instructions
For your own protection and for the
protection of your electrical tool, pay
attention to all parts of the text that are
marked with this symbol!
WARNING – Reading the operating instruc-
tions will reduce the risk of injury.
WARNING – Read all safety warnings,
instructions, illustrations and
specifications provided with this power tool.
Failure to follow all instructions listed below may
result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future
reference. Pass on your electrical tool only
together with these documents.
4. Special Safety Instructions
For your own protection and for the
protection of your power tool, pay
attention to all parts of the text that are
marked with this symbol!
Hold the power tool by insulated gripping surfaces,
because the sanding surface may contact its own
cord. Cutting a "live" wire may make exposed metal
parts of the power tool "live" and could give the
operator an electric shock.
Flying sparks are created when sanding metal.
Ensure that no persons are in danger. Due to the
risk of fire, all combustible materials must be
removed from the work area (area affected by flying
sparks).
Use of a fixed extractor system is recommended.
Materials that generate dusts or vapours that may
be harmful to health must not be processed.
Wear ear protectors.
10
WARNING – Always wear protective
goggles.
WARNING – Always operate the power tool
with two hands. Loss of control can cause
personal injury.
Do not convert this power tool to operate in a
way which is not specifically designed and
specified by the tool manufacturer. Such a
conversion may result in a loss of control and cause
serious personal injury.
Do not use sanding belts which are not
specifically designed and recommended by the
tool manufacturer. Just because the accessory
can be attached to your power tool, it does not
assure safe operation.
The rated speed of the sanding belt must be at
least equal to the maximum speed marked on
the power tool. Sanding belts running faster than
their rated speed can break and fly apart.
The dimensions of the sanding belt mounting
must fit the dimensions of the mounting
hardware of the power tool. Sanding belts that do
not match the mounting hardware of the power tool
will run out of balance, vibrate excessively and may
cause loss of control.
Do not use damaged sanding belts. Before
each use, check the sanding belt for chipping,
cracks or signs of severe wear and tear. After
inspecting and installing the sanding belt,
position yourself and bystanders away from
the plane of the rotating sanding belt and run
the power tool at maximum no-load speed for
one minute.
Wear personal protective equipment.
Depending on application, use face shield,
safety goggles or safety glasses. As
appropriate, wear dust mask, hearing
protectors, gloves and workshop apron
capable of stopping small abrasive or
workpiece fragments. The eye protection must be
capable of stopping flying debris generated by
various applications. The dust mask or respirator
must be capable of filtrating particles generated by
the particular application. Prolonged exposure to
high intensity noise may cause hearing loss.
Keep bystanders a safe distance away from
your work area. Anyone entering the work area
must wear personal protective equipment.
Fragments of workpiece or of a broken accessory
may fly away and cause injury beyond immediate
area of operation.
Secure the workpiece against slipping, e.g. with the
help of clamping devices.
Wear suitable clothing. Do not wear loose clothing
or jewellery. Keep hair, clothing and gloves at a safe
distance from the tool and moving parts. Loose
clothes, jewellery or long hair can be caught in
moving parts. There is a risk of injury in this case.
Publicité
