HP Photosmart C4500 All-in-One Série Guide D'utilisation page 29

C4500 All-in-One series home page. (The home page is a Web page that resides within the
HP All-in-One.)
To access the HP Photosmart C4500 All-in-One series home page
▲ On your computer, open the Web browser you normally use to access the Internet (for example,
Internet Explorer.) In the Address box, type the URL of the product as it was shown on the
Network Configuration Page (for example, http://192.168.1.101.)
The HP Photosmart C4500 All-in-One series home page should appear.
NOTE: If you are using a proxy server in your browser, you might need to disable it to
access the Embedded Web Server.
If you can access the HP Photosmart C4500 All-in-One series home page, try using the product over
the network (such as to scan or print) to see if your network setup was successful.
If you cannot access the HP Photosmart C4500 All-in-One series home page or are still having
problems using the product over the network, continue to the next section regarding firewalls.
Step 3: Check to see if the firewall software is blocking communication
If you cannot access the HP Photosmart C4500 All-in-One series home page and are sure both the
computer and HP Photosmart C4500 All-in-One series have active connections to the same network,
the firewall security software might be blocking communication. Turn off any firewall security software
running on your computer and then try to access the HP Photosmart C4500 All-in-One series home
page again. If you can access the home page, try using the HP Photosmart C4500 All-in-One series
(for printing or scanning).
If you are able to access the home page and use your HP Photosmart C4500 All-in-One series with
the firewall turned off, you will need to reconfigure your firewall settings to allow the computer and
HP Photosmart C4500 All-in-One series to communicate with each other over the network. For more
information, see "Configure your firewall to work with HP products" on page
If you are able to access the HP Photosmart C4500 All-in-One series home page but are still unable
to use the HP Photosmart C4500 All-in-One series even with the firewall turned off, continue to steps
4 and 5.
Step 4: Make sure the product is online and ready
To check the printer status
1. Do one of the following, depending on your operating system:
• Windows XP: Click Start, point to Printers and Faxes, and then select View/Details.
• Windows Vista: Click Start, point to Control Panel, and then select Printers and Faxes.
2. Do one of the following, depending on the printer status:
• If the product says Offline, right-click the product and select Use Printer Online.
• If the product says Paused, right-click the product and select Resume Printing.
3. Try using the product over the network.
If you can use the product after performing the steps above but find that the symptoms persist as
you continue to use the product, your firewall might be interfering. For more information see
"Configure your firewall to work with HP products" on page
the network, continue to the next section for additional troubleshooting help.
Step 5: Make sure the HP Network Devices Support service is running
To restart the HP Network Device Support service
1. Delete any print jobs currently in the print queue.
2. Do one of the following, depending on your operating system:
• Windows XP: Click Start, right-click My Computer, and click Manage. Double-click
Services and Applications, and then select Services.
• Windows Vista: Click Start, right-click Computer, and click Manage. Double-click
Services and Applications, and then select Services.
8.
8. If you still cannot use the product over
Network troubleshooting 25