Publicité
883P
Adjusting the functions
Winding the movement
Proceed to wind the movement with the crown in position 0. Turn it forward until it locks.
Setting the time in the main time zone
The mechanism is equipped with a balance-stopping device. Pulling the crown to position 1
will stop the movement. Pull the crown out to position 1 then turn it forward or backward to
position the hands. Push the crown back to position 0 after the adjustment.
Setting the time in the second time zone
The corrector at 10 o'clock enables you to change the time in the second time zone, which is
located in the counter at 9 o'clock, by means of the correcting tool supplied with the watch.
Pressing once advances the time by one hour.
12
-
-
Publicité
