Maintenance & Service - Evolite AIR Série Mode D'emploi

1."Spot" controls the RF receiving function of Spot series.
2. "Beam" controls the RF receiving function of Beam series.
3. "Wash" controls the RF receiving function of Wash series.
4. "Par" controls the RF receiving function of Par light series.
5. "Dimmer" brightness adjustment (press this button to adjust the
brightness by pressing the "+" and "-" buttons).
6. "Strobe"turn on the strobe (press this button to adjust the speed by pressing the "+" and "-"buttons).
7. "< " (slow) Adjust the speed of the built-in program or adjust the
sensitivity of the sound control.
8. "> " (fast) Adjust the speed of the built-in program or adjust the sensitivity of the sound control.
9. "1 - 9" is the program number key in the built-in program or voice
control state, press the corresponding button to enter the corresponding
program, press this button to select the color in the "Dimmer" or "Strobe"
state.
10. " REC" Clear all actions of the current fixtures.
11. "DMX" selects wired DMX signal as a signal source.
12. "WDMX" selects the wireless DMX signal as the signal source.
13. "Auto" running built-in program.
14. "Sound" running voice control program.
 Maintenance & service
o Cleaning
The cleaning of internal must be carried out periodically to optimize light output. Cleaning frequency depends
on the environment in which the fixture operates: damp, smoky or particularly dirty surrounding can cause
greater accumulation of dirt on the fixture's optics.
 Clean with soft cloth using normal glass cleaning fluid.
 Always dry the parts carefully.
 Clean the external optics at least every 20 days.
27
Air Wash 710z User's Manual Ver. 1.00 Page