Dmx Protocol; Master/Slave Mode; Maintenance & Service; Cleaning - Evolite EVO SPOT 90 Mode D'emploi

Note. If 2 fixtures are addressed with same DMX value, they will move exactly the same way.
DMX-protocol
15 Ch an n e ls m o d e
DMXch
CH1
CH2
CH3
CH4
CH5
CH6
CH7
CH8
CH9
CH10
CH11
CH12
CH13
CH14
CH15
o Master/ Slave Mode
Use standard DMX cables to daisy chain your units together via the DMX connector on the rear of the
units.Proper performance it may be necessary to use a terminator at the last fixture. For more information
about terminators.
 Maintenance & service
o Cleaning
The cleaning of internal must be carried out periodically to optimize light output. Cleaning frequency depends
on the environment in which the fixture operates: damp, smoky or particularly dirty surrounding can cause
greater accumulation of dirt on the fixture's optics.
 Clean with soft cloth using normal glass cleaning fluid.
 Always dry the parts carefully.
 Clean the external optics at least every 20 days.
EVO SPOT 90 Manual Ver. 1.00
Function
Pan
Tilt
Pan Fine
Tilt Fine
Pan/Tilt Speed
Strobe
Dimmer
Color Wheel
Gobo Wheel
Gobo Shake
Gobo Rotation
Prism
Prism Rotation
Focus
Reset
Value
0-255 Rotation 530°
0-255 Rotation 270°
0-255 Pan fine
0-255 Tilt fine
0-255 Speed Pan/Tilt
0-255 Strob effect from slow to fast
0-255 Dimmer from 0 to 100%
0-255 Colors
0-255 Gobos
0-255 Gobo Shake from slow to fast
0-255 Gobo rotation from slow to fast
0-255 Prism
0-255 Prism rotation
0-255 Focus
0-255 Reset fact. Presets
Description
16
Page