Dmx-Protocol - Evolite AIR Série Mode D'emploi

Auto Master / Slave Mode in WDMX (Wireless DMX):
It is possible to use your moving head in automatic and sound mode by transmitting the signal from a
moving head to the wireless one.
To do this, select Master from the Auto Run menu of your Master lyre, then select WDMX IN & OUT
from the Signal Set menu.
The slave moving head must be set in DMX mode address 001 and the WDMX IN & OUT function
activated in the Signal Set menu.
Remember to select the same group of frequencies on the back of your moving head (colored LEDs).
You can also use a cable from your controller to the first moving head, and transmit the DMX signal by
wireless to the other units.
o DMX Protocol
Mode/Channel
16b 18b
1 1
2
2
3 3
4
4
5
6
Air Wash 710z User's Manual Ver. 1.00
Values
0-255
0-31
32-63
64-95
96-127
Pulse-effect in sequences slow to
128-159
fast
160-191
192-223
Random strobe effect slow to fast
224-255
0-255
Fine control of Pan movement
0-255
0-255
Fine control of Tilt movement
0-255
Function
Dimmer
Dimmer 0%...100%
Shutter
Shutter closed
Shutter open
Strobe effect slow to fast
Shutter open
Shutter open
Shutter open
Pan
PAN Movement
Pan-fine
Tilt
Tilt Movement
Tile-fine
24
Page