Publicité
OPERATING THE HOOD (continued)
Controls
(continued):
•
Adjusting the timer function:
• While the blower is not running, press and hold Decrease (-) button over 3 seconds to
enter timer mode. Adjust to desired period of delay off timer by pressing Increase (+)
or Decrease (-) button (from a minimum of 1 minute to a maximum of 15 minutes). This
setting will be saved immediately.
•
Activating the timer function:
• While the blower is running, press and hold Power button for over 3 seconds to activate
delay off timer. Power-off delay indicator will lit up and Power-off delay digital timer will
begin to countdown, when it reaches zero, the blower will shut down.
•
Adjusting the light:
• Press Light button once to turn on the lights and once again to turn off the lights.
• While the lights are off, press and hold Light button for over 3 seconds to adjust the
lights to desired intensity. Level of brightness will be stored in the system's memory.
CAUTION: DO NOT touch the lights until they are switched OFF and cooled.
NOTE:
Light settings are independent from other settings (including power-off delay) and lights have to be
manually turned on or off.
NOTE:
The system saves user configurations. Settings such as light, timer and blower speed will remain the same
the next time it is turned on.
All manuals and user guides at all-guides.com
24
Publicité
