Publicité
(*) Before installing the product, keep it at room temperature where it has previously been stored or transported at a very high or very low
temperature.
(**) The average product life is a purely indicative estimate. It applies to compliant usage, installation and maintenance conditions. It is also
infl uenced by other factors, such as climatic and environmental conditions.
Usage limitations
Authorisation required
Please enter your username and password
Type
Radio modules
Language
Tubular motors (for 3 remote controls)
Log-in mode
Rooms (maps)
Password
Radio d evices with diff erent frequencies (868.65 MHz and 869.5 MHz) must be more than 50 cm apart.
Installation
Place the device away from metal objects that may shield the signal and from devices that generate magnetic fi elds.
Use the web interface for advanced device confi guration.
The device can be used without changing the default confi guration.
Access to advanced confi guration pages with an Ethernet cable connection
Connect the device to your PC (router, switch) using the Ethernet cable provided.
The fi rst time the device is switched on, connect the power supply to the device and the mains; by default, the device uses the same confi guration
as the network it is connected to (DHCP). After the network settings have been reset, the device has the static IP address 192.168.1.80.
Access to advanced confi guration pages with a Wi-Fi connection
The device generates its own Wi-Fi network.
Connect the power supply to the device and the mains.
Search for the Wi-Fi network generated by the device on your PC (tablet, smartphone): (SSID:QBE_0x0373xxxx).
Enter the device address in the browser address bar (Chrome, Firefox, Safari): (192.168.9.1).
Maximum number of controllable devices
32
15
30
Publicité
