Publicité
Alerts
Possible causes
THE RIOED8WS OR THE
WIRELESS
WIRELESS
RIOPH8WS ARE NOT
CH1
CH1
COMMUNICATING WITH
CH2
CH2
THE RIOCT8WS
The batteries, on one or
more connected radio
devices, are almost flat.
RIOLX8WS
makes three
quick flashes
3 beeps
LED stays on,
When the batteries are almost flat on the RIOPH8WS and RIOED8WS
devices, they make a buzzing sound for 10 seconds.
FA01695M4A - 06/2024
FA01695M4A - 06/2024
Fix
Check the efficiency of
the radio transmission.
Make sure that the
batteries are not flat.
Check the state of the
batteries fitted on the
connected radio devices
and replace them within
10 days.
LED is off,
LED flashes
Buzzer active
Legislative references
This product complies with the applicable standards in force at the
time of manufacturing.
RED - CAME S.p.A. declares that the product described in this
manual complies with Directive 2014/53/EU and the Radio
Equipment Regulations 2017.
The full EC declaration of conformity and UK Conformity Assessed
(UKCA) marking information can be found at www.came.com.
RIOCT8WS paired with a RIOED8WS and together with
an oper-ator, or a control panel, with safety test enabled,
is a Category 2 safety device according to EN 954-1.
RIOCT8WS paired with a RIOED8WS, is a Category 2 safety device
according to EN 954-1.
DECOMMISSIONING AND DISPOSAL. Dispose of the packaging
and the device at the end of its life cycle responsibly, in compliance
with the laws in force in the country where the product is used. The
recyclable components are marked with a symbol and the material's
ID marker.
THE DATA AND INFORMATION IN THIS MANUAL MAY BE CHANGED
AT ANY TIME AND WITHOUT NOTICE.
THE MEASUREMENTS, UNLESS OTHERWISE STATED, ARE IN
MILLIMETERS.
Publicité
