Publicité
GB
Remote control
The awning may be operated using the radio remote
control.
► P. 9, fig. 5
• [
] button: Retracting/closing the awning
• [
] button: Stopping the opening/closing action
• [
] button: Extending/opening the awning
• A control LED flashes when one of the buttons is
pressed.
To extend or retract, press the upper or lower button.
The awning stops if you press the middle button. The
motor stops automatically after three minutes or
when the end position switch is reached.
Programming the radio remote control
If the motor cannot be controlled with the remote con-
trol even though the batteries are fully charged,
please reset it to the motor. To do that, disconnect the
motor from the power for at least 10 seconds, plug it
in and quickly press the following buttons.
– Briefly press button [P2] 2x
– Press and hold button [
Hand crank
► P. 9, fig. 6
The hand crank is used only to retract or extend the
awning in the event of a power failure or when the
remote control is defective.
Cleaning and maintenance
NOTICE! Potential damage to the awn-
ing fabric! Ripples in the vicinity of the
hem, seam and panels is the result of mul-
tiple ply fabric and different wrapping
thickness on the cloth spindle. The
stretching in the material that results may
produce patterns on the fabric.
Ripples from wrapping next to the seam
on the rolled up and unrolled cloth are
caused by double ply material in the vicin-
ity of the stitching.
The awning should be retracted when leaving even
for a short time or if wind is anticipated.
If the awning becomes wet, extend as soon as possi-
ble to allow it to dry. Unsightly spots may appear if wet
awning fabric is rolled up for longer periods of time.
The awning fabric can be cleaned by dry brushing.
Remove persistent dirt and stains with warm soapy
water and a brush. Allow fabric to dry before retract-
ing.
Storage, disposal
Storage
NOTICE! Potential damage to the awn-
ing fabric! Do not expose the awning to
wet weather conditions unnecessarily!
For long-term storage keep the awning in a dry area.
Preparing for disposal
Removing the battery
Note: The battery is not replaceable.
44
] 1x
At the end of the device lifetime, you should remove
all batteries before disposing of the item.
CAUTION! Risk of injury by splinter-
ing! Do not break device forcefully.
– Open the housing.
– Separate the connections and remove the battery.
– Dispose of the batteries in accordance with the
regulations.
Disposal
Disposing of the device
A crossed-out wheelie bin icon means: Bat-
teries and rechargeable batteries, electrical
or electronic devices must not be disposed of
with household waste. They may contain
substances that are harmful to the environ-
ment and human health.
Consumers must dispose of waste electrical devices,
spent portable batteries and rechargeable batteries
separately from household waste at an official collec-
tion point to ensure that these items are processed
correctly. The product can be returned free of charge
in accordance with the legal requirements, for exam-
ple through a municipal waste disposal company or a
dealer.
Batteries, rechargeable batteries and lamps
that are not permanently installed in waste
electrical equipment and can be removed in
a non-destructive way must be removed and
disposed of separately before disposal of the equip-
ment. Lithium batteries and rechargeable battery
packs of all systems are only to be handed in to the
waste collection points in a discharged state. The bat-
teries must always be protected against short circuits
by taping off the poles.
All end users are responsible for deleting any per-
sonal data stored on waste devices prior to their dis-
posal.
Disposing of the packaging
The packaging consists of cardboard and
marked plastics that can be recycled.
– Take these materials to a recycling cen-
tre.
Disposal of battery
Do not dispose of a battery pack with the
household waste!
Do not dispose of a battery pack in water!
Do not burn the battery pack!
Do not expose the battery pack to sunlight
or increased temperatures!
MAX xx °C
MAX xx °C
Do not charge the battery.
Do not short circuit the battery.
Publicité
