Publicité
The control unit of the appliance is located on the inside. Check that the thermostat is off [0]. Check that the voltage
corresponds with the voltage stated on the information plate and insert the plug in the socket.
Adjusting the temperature
By means of the thermostat you are able to switch on the appliance and change the temperature
in the refrigerator. The possible positions of the thermostat:
no cooling, now power
0
least cooling
1
2-6
optimum temperature
most cooling
7
Set the temperature with the thermostat knob and select a position between 1 and 7. We recommend setting the appliance
to position 3-4. The appliance will now cool continuously until the set temperature has been reached. Allow the appliance
to reach the set temperature, before filling it with food. Usually this will take 2 to 3 hours. After that, you can set the thermostat
to the required position and fill the appliance with food.
To switch off the appliance, set the thermostat to the [0] position and remove the plug from the socket.
Attention:
The ambient temperature, the frequency of opening the doors and the position of the appliance have an effect on the
temperature in the appliance. Take this into account when setting the thermostat.
Super freeze
Use this mode when the appliance is getting warmer and no longer cools properly due to extremely hot weather,
frequently opening the door or placing a large quantity of food in the appliance at once.
In order to restore the cold temperature, set the thermostat to the super freezing mode.
When this mode is selected, the temperature of the freezer section automatically drops to -25 °C for a maximum period
of 50 hours. After that, the temperature of the freezer section returns to the preset temperature.
To set the super freezing mode, the thermostat knob must be turned to different positions in a certain order:
Current setting
Turn the knob
(can also be a different
to position 0.
setting).
Caution: setting must take place within 20 seconds.
As long as the super freezing mode is active, the lighting will flash. It will light up normally when the super freezing mode is off.
To switch off the super freezing mode, you must turn the thermostat knob to position 0 and then back to the required position.
After 50 hours, the super freezing mode stops automatically.
Note: use the super freezing mode if you want to freeze a large amount of food at the same time. Freezing will go faster,
the nutrients will be preserved and you are able to store the food for a long time.
Open door alarm
The interior lighting starts to flash when the door of the cooler section remains open for more than 60 seconds.
USE
Turn the knob to the
Turn the knob back
highest position 7.
to 0.
EN - 24
Then turn the knob back
to the required position.
Publicité
