all-clad PC8-PRECISION Guide De L'utilisateur page 7

• On all burners, make sure that PC8-PRECISION
is properly centered.
Operating Instructions
This appliance cooks under pressure. Improper use may result in scalding injury.
Make certain unit is properly closed before operating.
Opening
Always pour a minimum amount of a liquid of at least 1 cup in the unit.
• Make sure that the cooking program selector (F) is
in the PRESSURE RELEASE
and that the pressure indicator is down.
• Move the handle from the horizontal to the
vertical position (the jaws open):
• Lift the lid.
The jaws must be
in contact with
the edge of the
lid.
• Spare-parts (lid gasket (reference SS-980919) timer,
basket and other parts) are available at your local All-Clad
approved service center.
• To have repairs performed, please call your local All-Clad
approved service center.
• Only use All-Clad genuine parts designed for your
product model.
Fig. 8
-
Fig. 1
• Make sure that the cooking program Selector (F) is in the
PRESSURE RELEASE position and the Opening/Closing
handle (E) is in the vertical position.
• Place the lid on the pressure cooker, taking care to ensure
that it is correctly positioned.
• Move the Open/Close handle from the vertical to the
horizontal position.
• Apply a little force at the end when closing to trigger the
locking mechanism.
• Once in the closed position, it is normal that the lid can
turn freely on the PC8-PRECISION pot.
If you cannot close the lid:
• Check that the Open/Close handle is in the vertical
position.
• Check that the gasket is in place properly.
All-Clad spare-parts
During
Opening/Closing
position
operations, the control
panel must be in place on
the lid.
Fig. 2
EN
Closing
3