Important; Replacing The Batteries - all-clad PC8-PRECISION Guide De L'utilisateur

If the Smart Timer
flashes continuously
with rapid beeps
8

IMPORTANT

Never remove
the Smart Timer
®
from its housing
during cooking.
ERROR MESSAGE
- The Smart Timer
®
- A cooking program has been selected
- When storing the lid upside down, the lid
does not press on the + and - buttons.
• The battery life depends on how often the timer is used.
However, when the display is completely or partially lost make
sure to replace the battery.
• In an effort to be friendly to the environment, do not throw
the battery away with general household waste but rather at a
collection center. The timer battery is a lithium manganese
button battery.
• You can replace battery (reference CR2032) or have it
replaced by a retailer authorized for this type of service.
• To remove the battery from the timer, open the battery
compartment.
• Always gently close the battery cover, never forcing past its
Fig. 11
stop.
Recommendations for use
• Never force down the battery cover when closing it.
• If you lose the cover, you can obtain a replacement from all
All-Clad approved service centers.
Remember to remove the
Smart Timer , the control
®
panel and the gasket
when cleaning the lid.
Make sure that:
is in place
®
on the PC8-PRECISION

Replacing the batteries

Fig. 11