all-clad PC8-PRECISION Guide De L'utilisateur page 10

Fitting, removing and operating
the timer
• To fit the Smart Timer
rear part, then clip down the front part.
• To remove the Smart Timer
and lift it.
Cooking always takes place in two phases:
• The duration of the first pressure phase is directly
linked to the chosen recipe or the kind of
ingredients to be cooked, and this is the time you
need to program on the Smart Timer
and + buttons.
• The second soft cooking phase is pre-programmed
into the Smart Timer
• You can switch the Smart Timer
by simultaneously pressing both buttons.
• During cooking you can change the cooking time
only if the Smart Timer
PC8-PRECISION. During the soft steam phase,
you cannot modify the cooking time.
6
• PC8-PRECISION is not an ordinary pressure cooker,
for All-Clad has innovated how best to preserve the
food's nutritional qualities and especially how to bring
out the full taste of every dish prepared.
• Every cooking program includes a soft steam phase while
finishing cooking, to bring out the taste in the food. The
steam is fast and powerful at the beginning of cooking
and becomes mild and moderate towards the end.
• The two cooking phases limit the possibility of
overcooking, to ensure perfect cooking with the best taste
and texture.
• To make it easier to use your PC8-PRECISION, the
timer will help and guide you through your recipes.
Fig. 7
®
(C) , first insert the
®
(C), press the tab
®
using the –
®
and is set automatically.
®
off at any time
®
is positioned on the
Using the Smart Timer
Never open your
PC8-PRECISION before
the end of the soft cooking
phase, as you could stop the
cooking process before the
ingredients are fully cooked.
Refer to the "Finishing
cooking" heading.
®
Rear part
Front part
Tab