IKEA LAGAN Mode D'emploi page 8

ENGLISH
Installing distance holder
WARNING!
Serious or fatal crushing injuries
can occur from appliance tip-over. ALWAYS secure
this appliance to the wall using tip-over restraints.
Using the supplied distance holder to fix the
appliance to the wall for the following advantages.
Refer to the separate Assembly Instructions for
detailed installation.
•
Allow enough space for air circulation between the
appliance and the walls.
•
Secure the appliance to the wall for tip-over
prevention.
First use
Connect the appliance to the power supply. The ideal
food storage temperatures are already factory-set
(intermediate).
Cleaning the appliance
Before using the appliance for the first time, clean the
appliance to remove the typical smell of a brand-new
product.
1. Make sure the appliance is disconnected from the
power supply.
2. Wipe the interior with a soft, moistened cloth.
3. Wash the internal accessories with lukewarm
water and some neutral soap. Rinse and dry
thoroughly.
CAUTION!
Do not use abrasive, chloride or acidic cleaning
agents or solvents.
•
Do not use scouring or abrasive sponges. The
metallic surfaces may corrode.
•
Never clean the accessories using a dishwasher.
They may become deformed.
Electrical connection
CAUTION!
Any electrical work required to
install this appliance should be carried out by a
qualified electrician or competent person.
WARNING!
This appliance must be earthed.
Failure to follow these instructions can result in
death, fire or electrical shock.
The manufacturer declines any liability should these
safety measures not be observed.
Note: After being switched on, the appliance needs
4-5 hours in order to reach the correct temperature to
store a typical volume of food.
The installation clearance around and above the unit
shall be no less than 1/8 inch (4 mm).
8