Télécharger Imprimer la page

OBI 367333 Mode D'emploi page 27

Publicité

Table of contents
Storage and transportation regulations
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Before you begin... . . . . . . . . . . . . . . . . 27
For your safety . . . . . . . . . . . . . . . . . . . 28
Your product at a glance . . . . . . . . . . . 30
Mounting . . . . . . . . . . . . . . . . . . . . . . . . 30
Operation . . . . . . . . . . . . . . . . . . . . . . . . 31
Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . 31
Troubleshooting . . . . . . . . . . . . . . . . . . 31
Disposal . . . . . . . . . . . . . . . . . . . . . . . . . 32
Technical data . . . . . . . . . . . . . . . . . . . . 32
Claims for defects . . . . . . . . . . . . . . . . . 98
Storage and transportation
regulations
• Store the unit in the manufacturer's origi-
nal packaging box in a dry closed venti-
lated premise with temperature range
from +5 °C to + 40 °C and relative humid-
ity up to 70%.
• Storage environment must not contain
aggressive vapors and chemical mixtures
provoking corrosion, insulation, and seal-
ing deformation.
• Use suitable hoist machinery for handling
and storage operations to prevent possi-
ble damage to the unit.
• Follow the handling requirements appli-
cable for the particular type of cargo.
• The unit can be carried in the original
packaging by any mode of transport pro-
vided proper protection against precipita-
tion and mechanical damage. The unit
must be transported only in the working
position.
• Avoid sharp blows, scratches, or rough
Built-in fan
handling during loading and unloading.
• Prior to the initial power-up after transpor-
tation at low temperatures, allow the unit
to warm up at room temperature for at
least 3–4 hours.
Before you begin...
Intended use
The device is designed as built-in fan in the
direct exhaust air operation or while operating
with short exhaust pipes.
This product is not intended for commercial
use. Generally acknowledged accident pre-
vention regulations and enclosed safety
instructions must be followed.
Only perform work described in these instruc-
tions for use. Any other use is improper. The
manufacturer will not assume responsibility
for damage resulting from such use.
What are the meanings of the symbols
used?
Danger notices and information are clearly
marked throughout these instructions for use.
The following symbols are used:
DANGER! Direct danger to life
and risk of injury! Directly danger-
ous situation that may lead to death
or severe injuries.
WARNING! Probable danger to life
and risk of injury! Generally dan-
gerous situation that may lead to
death or severe injuries.
CAUTION! Possible risk of injury!
Dangerous situation that may lead to
injuries.
GB
27

Publicité

loading