Publicité
7.
Place the HEPA filter and filter sponge back in the dust collector lid. Place the pre-filter back in the
dust collector. Ensure that all parts are completely dry before placing back into the appliance.
1
5
CLEANING THE WATER TANK
1.
Press the release catch to remove the water tank.
2.
Remove the mop from the tank.
3.
Wash the mop in warm water with a mild detergent. Allow the mop to dry completely.
4.
Pour the water from the tank. Rinse the tank using warm water and allow to dry completely.
1
CLEANING THE MACHINE
·
Clean the side brushes, sensors, charging contacts and the charging station regularly using a soft
cloth.
·
After numerous uses, the side brushes should be
replaced. The maximum duration of the brushes
is approximately 12 months. The brushes and the
machine are marked with L (left) and R (right); make
sure they match.
·
Never submerge the machine in water!
·
The sensors may not become wet.
www.domo-elektro.be
2-3
6
2
4
3
DO7296S
71
Publicité
